Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality ASTM B514 Welded Pipe, which is available in different designs, shapes and sizes to our clients. The molybdenum content of the nickel – molybdenum alloys such as these ASTM B514 Nickel-Iron-Chromium Alloy Pipes is that there is a strong tendency for phases other than the desirable (face – centered cubic) gamma phase to form in the microstructure, particularly in the temperature range 500 Degree C to 900 Degree C. The time – temperature – transformation diagram shown above illustrates the advantages of these ASTM B514 Nickel-Iron-Chromium Alloy Welded Pipes over its predecessor (B-2 alloy).
ASTM B514 Welded Pipe Manufacturer In India | ASTM B514 Welded Pipe Manufacturer In Mumbai | ASTM B514 Welded Pipe Exporter In India | ASTM B514 Welded Pipe Exporter In Mumbai | ASTM B514 Welded Pipe Supplier In India | ASTM B514 Welded Pipe Supplier In Mumbai | ASTM B514 Welded Pipe Stockist In India | ASTM B514 Welded Pipe Stockist In Mumbai
One of the chief attributes of these ASTM B514 Nickel-Iron-Chromium Alloy Cold-Worked Pipes is their resistance to chloride – induced stress corrosion cracking. A common solution for assessing the resistance of these ASTM B514 Nickel-Iron-Chromium Alloy Annealed Pipes to this extremely destructive form of attack is boiling 45 % magnesium chloride (ASTM Standard), typically with stressed U – bend samples.
As is evident from the following results, these ASTM B514 Tubes are much more resistant to this form of attack than the comparative, austenitic stainless steels. Wrought products such as these ASME SB 514 Nickel-Iron-Chromium Alloy Pipes are being supplied in the Mill Annealed (MA) condition, unless otherwise specified. This solution annealing procedure has been designed to optimize the corrosion resistance and ductility of these ASME SB 514 Nickel-Iron-Chromium Alloy Welded Pipes.
Scope And Manufacturing
ASTM B514 specification covers Inconel 800 (UNS N08800) welded pipe whose outside diameter and nominal wall pipe shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of the specification. Welded pipe shall be furnished with a scale-free finish. When bright annealing is used, descaling is not necessary.
Pipe is capable of withstanding, without cracking, flattening under a load applied gradually at room temperature until the distance between the platens is five times the wall thickness. Welded pipe shall be made from flat-rolled alloy by an automatic welding process with no addition of filler metal. Subsequent to welding and prior to final solution treatment, the material shall be cold worked either in both weld and base metal or in weld metal only. The weld shall be positioned 90 deg from the direction of the applied flattening force.
Grades :ASTM B514 Welded Pipe, Incoloy 800 Welded Pipe
ASTM B514 Welded Pipes Specifications |
||
| Size | : | 6.00 mm OD up to 914.4 mm OD |
| Thickness | : | 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS |
| Length | : | Within 13500mm |
| Type | : | Welded Pipes |
| Grades | : | UNS N08800, UNS N08810, UNS N08120 |
ASTM B514 Welded Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
ASTM B514 Pipe Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
ASTM B514 Welded Pipe
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality ASTM B514 Welded Pipe, which is available in different designs, shapes and sizes to our clients. The molybdenum content of the nickel – molybdenum alloys such as these ASTM B514 Nickel-Iron-Chromium Alloy Pipes is that there is a strong tendency for phases other than the desirable (face – centered cubic) gamma phase to form in the microstructure, particularly in the temperature range 500 Degree C to 900 Degree C. The time – temperature – transformation diagram shown above illustrates the advantages of these ASTM B514 Nickel-Iron-Chromium Alloy Welded Pipes over its predecessor (B-2 alloy).
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5