ASTM A333 GR. 6 Carbon Steel Pipes

Sachiya Steel International is one of the pioneers in trading and supplying of ASTM A333 GR. 6 Carbon Steel Pipes, which should be limited to 570 Degree F (300 Degree C). Pre – heating of the ASTM A333 GR. 6 Carbon Steel Seamless Pipes is not recommended and no post weld heat treatment of the parts is necessary.

If multi – pass welding is performed in ASTM A333 GR. 6 Carbon Steel Welded Pipes, it is important to allow the weld to cool below 300 Degree F (150 Degree C) before continuing. Under no circumstances should hydrogen be added to the shielding gas for to make ASTM A333 GR. 6 Carbon Steel EFW Pipes to avoid the risk of cold cracking in the weld zone.

ASTM A333 GR. 6 Carbon Steel Pipes | ASTM A333 GR. 6 Carbon Steel Pipes | ASTM A333 GR. 6 Carbon Steel Pipes | ASTM A333 GR. 6 Carbon Steel Pipes | ASTM A333 GR. 6 Carbon Steel Pipes | ASTM A333 GR. 6 Carbon Steel Pipes | ASTM A333 GR. 6 Carbon Steel Pipes

If necessary, small amounts of N2 gas can be added in ASTM A333 GR. 6 Carbon Steel ERW Pipes to offset any loss of nitrogen in the weld zone. Sachiya Steel International is one of the well – known trader and seller of ASTM A333 GR. 6 Carbon Steel Round Pipes, which is available in dissimilar sizes and shapes to our patrons.

ASTM A333 GR. 6 Carbon Steel Square Pipes is sensitive to the precipitation of intermetallic phases that will degrade mechanical properties Sigma phase, where precipitates can form after only a few dozen minutes between 1110 Degree F and 1830 Degree F (600 Degree C / 1000 Degree C).

 

ASTM A333 Gr.6 Carbon Steel Pipes Specifications

Specifications : ASTM A333 ASME SA333
Dimensions : ASTM, ASME and API
Size : 1/2” NB to 36” NB
Thickness : 3-12mm
Schedules : SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
Type : Seamless / ERW / Welded / Fabricated
Form : Round, Hydraulic Etc
Length : Min 3 Meters, Max18 Meters, or according to customer’s requirement
End : Plain End, Beveled End, Treaded

 

ASTM A333 Gr.6 Pipes Chemical Composition

A333 Gr.6
C Mn P S Si Ni
0.3 0.29-1.06 0.025 0.025 ≥0.10

ASTM A333 Gr.6 Pipe Mechanical Properties

Grade Yield strength, min, psi (MPa) Tensile strength, min, psi (MPa) Elongation (%)
A333 Gr.6
35 000 (240) 60 000 (415) 30 min

 

CS A333 Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

Carbon Steel A333 Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

 

ASTM A333 GR. 6 Carbon Steel Pipes

Sachiya Steel International is one of the pioneers in trading and supplying of ASTM A333 GR. 6 Carbon Steel Pipes , which should be limited to 570 Degree F (300 Degree C).

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5