Sachiya Steel International is one of the Leading Manufacturer And Exporter of Carbon Steel AISI 1018 Round Bars, where the required size may not be obtained from the mill directly. A good example of the effects of alloying AISI 1018 Carbon Steel Square Bars is the making of high – strength steel with good weldability. This cannot be done by using only AISI 1018 Carbon Steel Flat Bars as a strengthened, because carbon creates brittle zones around the weld, but it can be done by keeping carbon low and adding small amounts of other strengthening elements, such as nickel or manganese.
In principle, the strengthening of AISI 1018 Carbon Steel Threaded Bars is accomplished by increasing the resistance of lattice structures to the motion of dislocations. In addition, most of these strong carbide or nitride formers generate a small grain size, because their precipitates have a nucleation effect in AISI 1018 Carbon Steel Hollow Bars and slow down crystal growth during recrystallization of the cooling metal.
Carbon Steel AISI 1018 Round Bars | Carbon Steel AISI 1018 Round Bars | Carbon Steel AISI 1018 Round Bars | Carbon Steel AISI 1018 Round Bars | Carbon Steel AISI 1018 Round Bars
Sachiya Steel International is one of the pioneer dealer and supplier for high quality AISI 1018 Carbon Steel Hexagonal Bars, where the cold operation process can be used to obtain the desired size. Heat treatment in AISI 1018 Carbon Steel Triangular Bars is given on the continuously rolling hearth furnace, where the furnace is fitted with temperature recorders and controllers. After the heat treatment process, AISI 1018 Carbon Steel Bars are straightened and subjected to pickling for removing scales from the surface.
Carbon Steel AISI 1018 Round Bar Specifications
|Specifications||:||AISI 1018, ASME SA1018|
|Dimensions||:||EN, DIN, JIS, ASTM, BS, ASME, AISI|
|Carbon Steel AISI 1018 Round Bars
|Finish||:||Bright, Polish & Black|
|Form||:||Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.|
AISI 1018 Round Bar Chemical Composition
Carbon Steel AISI 1018 Rods Mechanical Properties
|Grades||Tensile Strength (ksi) min||Elongation (% in 50mm) min||Yield Strength 0.2% Proof (ksi) min||Hardness|
Equivalent Grades for AISI 1018 Round Bar
Carbon Steel AISI 1018 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Gas Processing
- Specialty Chemicals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Pulp and Paper Industry
AISI 1018 Steel Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Carbon Steel AISI 1018 Round Bars
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Carbon Steel AISI 1018 Round Bars, where the required size may not be obtained from the mill directly.
Product Brand: Sachiya Steel International
Product In-Stock: InStock