Email Us on [email protected] | Call Us on +91 9769056007 | +91 22 66518863

sachiya steel international

Copper Nickel U Pipe Bends

Buttweld 180 Degree Pipe Bend Manufacture

By |2021-07-09T07:38:52+00:00July 9th, 2021|Buttweld Fittings|

Sachiya Steel International is a manufacturer and Exporter of first-rate Buttweld 180 Degree Pipe Bend. These 180 Degree bends are elbow pipe fittings that are widely used as a point of connection between two lengths of pipes to produce a change in the direction of flow in the pipe usually at 180 ° (180 degree) angle. A

Buttweld 10D Pipe Bends Manufacture

By |2021-07-09T07:24:55+00:00July 9th, 2021|Buttweld Fittings|

Sachiya Steel International is a manufacturer and Exporter of Buttweld 10D Pipe Bends. The 10 bends are pipe fittings that have an extra-long curvature radius i.e. ten times the main drain bore diameter(D). A part of the pipe is formed or twisted in a loop. The width of the curve is determined in the centerline. The

Buttweld 4D Pipe Bends Manufacture

By |2021-07-08T09:41:12+00:00July 8th, 2021|Buttweld Fittings|

Sachiya Steel International is an acknowledged manufacturer and supplier of Buttweld 4D Pipe Bends. A 4D bend is a bend where the curve length is four times the pipe diameter. It’s a finer bent than a 1.5D bend, which looks like a regular right angle of 90 degrees, but it’s a stronger bend than a 4D bend, which

Buttweld 5D Pipe Bends Manufacture

By |2021-07-08T09:25:39+00:00July 8th, 2021|Buttweld Fittings|

We at Sachiya Steel International produce the best quality Buttweld 5D Pipe Bends. that are Pipe bends which act as structural pathways to allow material movements, such as water and fuel transfer. The 5D bend’s “D” reflects the pipe’s outside diameter, as expressed in centimeters. A bend radius is compounded by this outer diameter to

3D Bend Pipe Manufacture

By |2021-07-06T07:37:54+00:00July 6th, 2021|Carbon Steel|

Sachiya Steel International is an industry-leading manufacturer and supplier of 3D Bend Pipe twists. 3D bends are pipe twists, the width of which is three times that of the outer thread. A wire can be twisted in multiple directions and angels. Nevertheless, the shape of an elbow varying from two degrees 90 degrees is some of

1.5D seamless pipe bends Manufacture

By |2021-07-06T07:17:46+00:00July 6th, 2021|Stainless Steel|

Sachiya Steel International leading manufacturer and supplier of 1.5D Bends. We produce these 1.5D seamless pipe bends using the finest quality resources, making sure that there elbow bends are suitable for applications in all desired conditions. Stainless Steel 1.5D Pipe Bend is the paragliding concept for metal shaping methods that are used to mold pipes or tubing indefinitely.

Go to Top