Titanium Grade 2 Bolts Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Bolts And Nuts, which is sometimes referred to as “Commercial Pure (CP)” due to its approximate yield strength. Designing with these Titanium Grade 2 Hex Head Bolts taking all factors into account has resulted in reliable, economic and more durable systems and components, which in many situations have substantially exceeded performance and service life expectations. Our Titanium Grade 2 Hex Head Nuts possesses the greatest formability, excellent corrosion resistance and high impact toughness.

Titanium Grade 2 Bolts Manufacturer In India | Titanium Grade 2 Bolts Manufacturer In Mumbai | Titanium Grade 2 Bolts Exporter In India | Titanium Grade 2 Bolts Exporter In Mumbai | Titanium Grade 2 Bolts Supplier In India | Titanium Grade 2 Bolts Supplier In Mumbai | Titanium Grade 2 Bolts Stockist In India | Titanium Grade 2 Bolts Stockist In Mumbai 
Titanium Grade 2 Bolts
Titanium Grade 2 Bolts

Continuous service temperatures for these Titanium Grade 2 Square Bolts can reach up to 800 Degree F with occasional, intermittent service at 1000 Degree F. Hold at 1103 Degree F to 1400 Degree F (595 Degree C to 760 Degree C) for two hours, then Air cool and Stress relive our Titanium Grade 2 Square Nuts by holding at 1004 Degree F to 1103 Degree F (540 Degree C to 595 Degree C) for 15 minutes to 30 minutes. However, the high cost of these Titanium Grade 2 Eye Bolts and processing limit their use to military applications, aircraft, spacecraft, and medical devices.

Our Titanium Grade 2 Eye Nuts is light weight and highly corrosion resistant, but has much lower strength than alpha – beta or beta titanium alloys. These Titanium Grade 2 T-Bolts should be emphasized that fabrication operations (annealing, descaling) can increase the impurity level unless particular care is taken.

Titanium Grade 2 Bolt/Nut Specifications

Specifications : ASTM B 348 ASME SB 348
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to Gr 2 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

Gr 2 Titanium Alloy Bolt/Nut Chemical Composition

Titanium Gr 2 C Ti N Fe H O V Al
0.1 max 99.2 min 0.03 max 0.3 max 0.015 max 0.25 max

Titanium Alloy Gr.2 Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 39900 , MPa – 275 Psi – 49900 , MPa – 344 20 %

Equivalent Grades for Grade 2 Titanium Bolt/Nut

STANDARD UNS WERKSTOFF NR.
Titanium Gr 2 R50400 3.7035

Ti. Alloy Gr 2 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Grade 2 Titanium Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Titanium Grade 2 Bolts

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Bolts And Nuts, which is sometimes referred to as “Commercial Pure (CP)” due to its approximate yield strength. Designing with these Titanium Grade 2 Hex Head Bolts taking all factors into account has resulted in reliable, economic and more durable systems and components, which in many situations have substantially exceeded performance and service life expectations. Our Titanium Grade 2 Hex Head Nuts possesses the greatest formability, excellent corrosion resistance and high impact toughness.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top