Titanium Gr 5 Beam Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Beam Other Titanium Products, which can be machined using slow speeds and high feed rates. Design of experimental technique in Titanium Grade 5 Angle, that is, response surface methodology (RSM), has been used to accomplish the objective of the experimental study. Wrought Titanium Grade 5 C-Channel is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required. Titanium Grade 5 Chain is the most widely used titanium alloy of the alpha – plus – beta class, and is also the most common of all titanium alloys.

Titanium Gr 5 Beam Manufacturer In India| Titanium Gr 5 Beam Manufacturer In Mumbai | Titanium Gr 5 Beam Exporter In India| Titanium Gr 5 Beam Exporter In Mumbai| Titanium Gr 5 Beam Supplier In India| Titanium Gr 5 Beam Supplier In Mumbai| Titanium Gr 5 Beam Stockist In India | Titanium Gr 5 Beam Stockist In Mumbai 

We export a wide assortment of Titanium Grade 5 I-Beam that is suitable for applications like static and rotating gas turbine engine components. The addition of 0.05 % palladium, 0.1 % ruthenium or 0.05 % palladium and 0.5 % nickel in Titanium Grade 5 H-Beam significantly increases corrosion resistance in reducing acid chloride and sour environments, raising the threshold temperature to well over 200 Degree C.

Titanium Gr 5 Beam
Titanium Gr 5 Beam

Titanium Grade 5 T-Beam is an alloyed titanium product containing 6 % Aluminum and 4 % Vanadium, and also has ELI (Extra Low Interstitial). Grade 5 Titanium Angle can be used in biomedical applications such as implantable components due to its biocompatibility, good fatigue strength and low modulus. Grade 5 Titanium Chain is produced by primary melting using vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM).

Titanium Grade 5 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B348 / ASME B348
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Titanium Gr 5 Angle
: 5mm to 9mm
Titanium Gr 5 Channel
: 40mm*20mm~300mm*300mm
Titanium Gr 5 Beam : 3″ thru 12.31″
Titanium Gr 5 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

Grade 5 Titanium Angle, Channel, Beam, Chain Chemical Composition

Grade C Al V O Ti Fe
Titanium Grade 5 6 min 4 min 0.02 max 90 min 0.25 max

Titanium Gr 2 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Grade 5 Titanium Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS
Titanium Grade 5 3.7165 R56400

Titanium Grade 5 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Grade 5 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top