Titanium Gr 2 Round Bars Manufacturer

Titanium Gr 2 Round Bars

Sachiya Steel International is one of the leading manufacturer and exporter of a vast collection of Titanium Gr 2 Round Bars. Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium. These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance in different hostile media. Titanium Grade 2 Threaded Bars as well offers superior strength and formability between grades 1 and 3. Titanium Grade 2 Hollow Bars provides soaring corrosion resistance and a better operational array than aluminum. By means of outstanding corrosion resistance, formability and moderate strength, Titanium Grade 2 Hexagonal Bars signifies the most extensively used form of titanium.

Meanwhile, Titanium Grade 2 Triangular Bars are also being offered in different sizes and shapes to our customers. Titanium Grade 2 Bars has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3 in terms of strength. This is partly due to low density and corrosion resistance of Titanium Grade 2 Rods which can be easily welded, hot and cold worked and machined.

Titanium Gr 2 Round Bars | Titanium Gr 2 Round Bars | Titanium Gr 2 Round Bars | Titanium Gr 2 Round Bars | Titanium Gr 2 Round Bars | Titanium Gr 2 Round Bars | Titanium Gr 2 Round Bars | Titanium Gr 2 Round Bars

Ti Alloy Gr. 2 Round Bars is used where corrosion resistance is an important criterion, or where operating temperatures preclude the use of aluminum. Ti Alloy Gr. 2 Bars is used in a wide range of industrial applications from oil & gas and chemical to marine industries.

Titanium Alloy Gr 2 Round Bar Specifications

Specifications : ASTM B348/ ASTM SB348
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Grade 2 Titanium Round Bar Chemical Composition

Grade Ti C Fe H N O
Titanium Grade 2  99.2 min  0.1 max 0.3 max  0.015 max 0.3 max  0.025 max

Titanium Alloy Grade 2 Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 4.5 g/cm3  1665 °C (3030 °F)  Psi – 49900 , MPa – 344  Psi – 39900 , MPa – 275  20%

Equivalent Grades for Grade 2 Titanium Round Bar

STANDARD WERKSTOFF NR. UNS
Titanium Grade 2 3.7035 R50400

Titanium Grade 2 Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Grade 2 Titanium Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Titanium Gr 2 Round Bars

Sachiya Steel International is one of the leading manufacturer and exporter of a vast collection of Titanium Gr 2 Round Bars. Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top