Stainless Steel 410 Tube to Union Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Tube to Union Fittings, which represent an excellent combination of corrosion resistance and fabricability. These Stainless Steel 410 Tube Fittings similar to parker and Swagelok is austenitic chromium – nickel stainless steel, non – harden able by thermal treatments. Stainless Steel 410 Compression Fittings may be cold worked to high tensile strengths with slightly lower. These Stainless Steel 410 Union Tube Fittings is the most widely used of the austenitic (chromium / nickel) stainless steels.

Stainless Steel 410 Tube to Union Fittings Manufacturer In India | Stainless Steel 410 Tube to Union Fittings Manufacturer In Mumbai | Stainless Steel 410 Tube to Union Fittings Exporter In India | Stainless Steel 410 Tube to Union Fittings Exporter In Mumbai | Stainless Steel 410 Tube to Union Fittings Supplier In India | Stainless Steel 410 Tube to Union Fittings Supplier In Mumbai | Stainless Steel 410 Tube to Union Fittings Stockist In India | Stainless Steel 410 Tube to Union Fittings Stockist In Mumbai 

 

Stainless Steel 410 Tube to Union Fittings
Stainless Steel 410 Tube to Union Fittings

In the annealed condition, Stainless Steel 410 Ferrule Fittings is essentially non – magnetic and becomes slightly magnetic with the application of cold work. These Stainless Steel 410 Double Ferrule Fittings is preferred in welding applications to exclude the formation of chromium carbides during cooling in the heat affected region of the weld. Heat these 410 Stainless Steel Union Fittings up to 1850 Degree F to 2050 Degree F and cool at sufficiently high rates through 1500 Degree F to 800 Degree F to avoid precipitation of chromium carbides.

For Stress Relief Annealing of these 410 Stainless Steel Tube Fittings, cold worked parts should be stress relieved at 750 Degree F for half-an-hour to two hours. 410 Stainless Steel Compression Fittings are weldable by most fusion or resistance welding techniques, where its principal use is for decorative purposes. If filler metal is required, these 410 Stainless Steel Ferrule Fittings is normally used.

Stainless Steel 410 Tube to Union Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 410 Tube To Union Chemical Composition

 

Grade C Mn Si P S Cr Mo Ni N
SS 410 0.15 max 1.0 max 1.0 max 0.040 max 0.030 max 11.5 – 13.5 0.50 max
Stainless Steel 410 Tube To Union Mechanical Properties

 

Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
410 65 (450) 30 (205) 20 217 96
Equivalent Grades for 410 Stainless Steel Ferrule Fitting Tube To Union

 

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 410 1.4006 S41000 SUS 410 410S21 X12Cr13
SS 410 Tube To Union Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 410 Tube To Union Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 410 Tube to Union Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Tube to Union Fittings, which represent an excellent combination of corrosion resistance and fabricability. These Stainless Steel 410 Tube Fittings similar to parker and Swagelok is austenitic chromium – nickel stainless steel, non – harden able by thermal treatments. Stainless Steel 410 Compression Fittings may be cold worked to high tensile strengths with slightly lower. These Stainless Steel 410 Union Tube Fittings is the most widely used of the austenitic (chromium / nickel) stainless steels.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top