Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Round Bar, which are generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade. Special consideration of Stainless Steel 410 Square Bars should be given to avoid brittle weld fractures during fabrication by minimizing discontinuities, maintaining low weld heat input and occasionally warming the part somewhat before forming. A major difference can be attributed to the addition of Stainless Steel 410 Flat Bars to control hardening which results in the need for higher heat input to achieve penetration during arc welding.

When weld filler is required, Stainless Steel 410 Threaded Bars is most often specified immersed in a warm solution of 10 % – 20 % nitric acid followed by a water rinse to remove any residual iron. Stainless Steel 410 Hollow Bars contains a minimum of 12 % chromium, just sufficient enough to give corrosion resistant properties. Stainless Steel 410 Hexagonal Bars has higher carbon content which is designed to optimize strength and hardness characteristics.

Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar

Stainless Steel 410 Triangular Bars has good ductility it the annealed condition but is capable of being hardened the highest hardness of the 12 % chromium grades. Due to its hardening properties, Stainless Steel 410 Bars is not often welded, although it is possible. Its best corrosion resistance is achieved when Stainless Steel 410 Rods is hardened and surface ground or polished.

SS 410 Round Bar Specifications

Specifications : ASTM A276, ASME SA276 / ASTM A479  ASME SA479
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 410 Round Bars
: Outside Diameter in the range of 4mm to 500mm
SS 410 Bright Bars
: Outside Diameter in the range of 4mm to 100mm
SS 410 Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
SS 410 Square Bars
: 18mm – 47mm (11/16″ to 1-3/4″)
SS 410 Flat Bars
: 1/2” to 10” in thickness range of 2mm to 150mm,
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

410 Stainless Steel Round Bar Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 410 0.15 max 1 max 1 max 0.040 max 0.030 max 11.5-13.5 0.75

Stainless Steel 410 Rods Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 MPa – 480  MPa – 275

Equivalent Grades for 410 Stainless Steel Round Bar

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 410 1.4006 S41000 SUS 410

SS 410 Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

410 Steel Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 410 Round Bar

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Round Bar, which are generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5