Stainless Steel 317 Flanges Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Flanges, which are hardened machining and becomes more difficult and probably impossible. Stainless Steel 317 Slip On Flanges is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. It’s very high carbon content of 1.0 % is responsible for these characteristics, which make Stainless Steel 317 Threaded Flanges particularly suited to such applications as ball bearings and valve parts. Stainless Steel UNS S31700 Weld Neck Flanges have lower attainable hardness but slightly higher corrosion resistances, where chips are tough and stringy so chip breakers are important.

Stainless Steel 317 Flanges Manufacturer In India| Stainless Steel 317 Flanges Manufacturer In Mumbai | Stainless Steel 317 Flanges Exporter In Indi a| Stainless Steel 317 Flanges Exporter In Mumbai | Stainless Steel 317 Flanges Supplier In India | Stainless Steel 317 Flanges Supplier In Mumbai | Stainless Steel 317 Flanges Stockist In India | Stainless Steel 317 Flanges Stockist In Mumbai 
Stainless Steel 317 Flanges
Stainless Steel 317 Flanges

Corrosion resistance is generally lower than the common austenitic Stainless Steel 317 Blind Flanges, and their useful operating temperature range is limited by their loss of ductility at sub – zero temperatures and loss of strength by over-tempering at elevated temperatures. In the annealed condition, Stainless Steel 317 Socket Weld Flanges is relatively easily machined; approximately the same as for high speed steel.

The great benefit of Stainless Steel 317 Lap Joint Flanges (and of other precipitation hardening grades of stainless steel) is that they are generally supplied in the solution treated condition, in which they are just machinable, and then can be age hardened to achieve quite high strengths. This aging treatment in Stainless Steel 317 Ring Joint Type Flanges is so low in temperature that there is no significant distortion.

Stainless Steel 317 Pipe Flanges Specifications

Specifications : ASTM A182 / ASME SA182
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

SS 317 Pipe Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.845 min

Stainless Steel 317 Plate Flanges Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

SS 317 Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 317 Pipe Flanges Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 317 Flanges

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Flanges, which are hardened machining and becomes more difficult and probably impossible. Stainless Steel 317 Slip On Flanges is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top