Stainless Steel 316Ti Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Socket Weld Fittings, which is considered to be more resistant to oxidation than type 316, especially in warm marine environments. Stainless Steel 316Ti Forged Socket Weld Elbow also shows resistance in extremely low temperatures, even down to cryogenic levels. In regards to heat, Stainless Steel 316Ti Forged Socket Weld Tee shows better resistance to creep, stress to rupture and overall strength than other stainless steel grades. Many of the same work practices effective on Stainless Steel 316Ti Forged Socket Weld Cap may also be employed, including weldability and work hardening through cold working.

Stainless Steel 316Ti Socket Weld Fittings Manufacturer In India | Stainless Steel 316Ti Socket Weld Fittings Manufacturer In Mumbai | Stainless Steel 316Ti Socket Weld Fittings Exporter In India| Stainless Steel 316Ti Socket Weld Fittings Exporter In Mumbai| Stainless Steel 316Ti Socket Weld Fittings Supplier In India | Stainless Steel 316Ti Socket Weld Fittings Supplier In Mumbai | Stainless Steel 316Ti Socket Weld Fittings Stockist In India| Stainless Steel 316Ti Socket Weld Fittings Stockist In Mumbai

In addition, Stainless Steel 316Ti Forged Socket Weld Coupling does not require post-work annealing to maximize its corrosion resistance, however annealing may be utilized in certain situations. Stainless Steel 316Ti Forged Socket Weld Cross is referred to as the stabilized grade of the 316 types, and also is recommended for higher temperature situations.

Stainless Steel 316Ti Socket Weld Fittings
Stainless Steel 316Ti Socket Weld Fittings

Stainless Steel 316Ti Forged Socket Weld Union contains a small amount — typically only 0.5 % — of titanium, where its low levels of carbon protects it against carbon precipitation. While it still possesses many of the characteristics of other 316 grades, the addition of titanium allows Stainless Steel 316Ti Forged Socket Weld Plug to be protected from precipitation at elevated temperatures, even with prolonged exposure.

Stainless Steel 316Ti Forged Socket weld Fittings Specifications

Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 316Ti Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 316Ti 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16 – 18 2.00-3.00 10.00 – 14.00 68.395 min

Stainless Steel 316Ti Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316Ti Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

Stainless Steel 316Ti Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 316Ti Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 316Ti Socket Weld Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Socket Weld Fittings, which is considered to be more resistant to oxidation than type 316, especially in warm marine environments. Stainless Steel 316Ti Forged Socket Weld Elbow also shows resistance in extremely low temperatures, even down to cryogenic levels.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top