Stainless Steel 316 Tube to Female Pipes Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Tube to Female Pipes similar to parker and Swagelok, where there are many different types of surface finish on stainless steel. In contrast, SS 316 Tube Fittings only show a gradual fall in the impact toughness value and are still well above 100 Degree C at -196 Degree C. SS 316L Compression Fittings are used across the whole temperature range from ambient to 1100 Degree C. A distinction is made between SS 316 Female Connector Fittings and heat – resisting steels, where this distinction is often blurred and it is useful to consider them as one range of steels.

Stainless Steel 316 Tube to Female Pipes Manufacturer In India | Stainless Steel 316 Tube to Female Pipes Manufacturer In Mumbai | Stainless Steel 316 Tube to Female Pipes Exporter In India | Stainless Steel 316 Tube to Female Pipes Exporter In Mumbai | Stainless Steel 316 Tube to Female Pipes Supplier In India | Stainless Steel 316 Tube to Female Pipes Supplier In Mumbai | Stainless Steel 316 Tube to Female Pipes Stockist In India | Stainless Steel 316 Tube to Female Pipes Stockist In Mumbai

 

Stainless Steel 316 Tube to Female Pipes
Stainless Steel 316 Tube to Female                             Pipes

Increasing amounts of Chromium and silicon impart greater oxidation resistance in SS 316L Ferrule Tube Fittings, whereas increasing amounts of Nickel impart greater carburization resistance. Some of these originate from the mill but many are applied later during processing of SS 316 Double Ferrule Tube Fittings, for example polished, brushed, blasted, etched and coloured finishes.

The importance of surface finish in determining the corrosion resistance of the surface of Stainless Steel 316L Compression Tube Fittings cannot be overemphasized. A rough surface finish of 316 Stainless Steel Female Connector Fittings can effectively lower the corrosion resistance to that of a lower grade of stainless steel. The standards for 316L Stainless Steel Female Connector Fittings have attempted to define the most common surface finishes.

Stainless Steel 316L Tube to Female Pipes Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
316 – 316L Stainless Steel Tube to Female Pipes Fitting Chemical Composition

 

Grade C Mn Si P S Cr Mo Ni N
316 – 316L min. 16.0 2.0 10.0
max. 0.08 2.0 0.75 0.045 0.03 18.0 3.0 14.0 0.10
Stainless Steel 316 – 316L Tube to Female Pipes Fitting Mechanical Properties

 

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316 – 316L 515 205 40 95 217
Stainless Steel 316 – 316L Tube to Female Pipes Fitting Physical Properties

 

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
316 – 316L 8000 193 15.9 16.2 17.5 16.3 21.5 500 740
SS 316/316L Tube to Female Pipes Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 316/316L Tube to Female Pipes Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 316 Tube to Female Pipes

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Tube to Female Pipes similar to parker and Swagelok, where there are many different types of surface finish on stainless steel. In contrast, SS 316 Tube Fittings only show a gradual fall in the impact toughness value and are still well above 100 Degree C at -196 Degree C. SS 316L Compression Fittings are used across the whole temperature range from ambient to 1100 Degree C. A distinction is made between SS 316 Female Connector Fittings and heat – resisting steels, where this distinction is often blurred and it is useful to consider them as one range of steels.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top