Stainless Steel 304 Outlet Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Outlet, which is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000 Degree F. Stainless Steel 304 Welding Outlet Fittings is readily fabricated by standard commercial procedures. In comparison to carbon steel, Stainless Steel 304 Socket Weld Outlet Fittings are tougher and tend to work hardens rapidly. Stainless Steel 304 Threading Outlet Fittings is a heat resisting stainless steel with high resistance to oxidation scaling and has high strength at elevated temperatures. Stainless Steel 304 Flexible Outlet Fittings can be welded using all of the common welding processes.

Stainless Steel 304 Outlet Manufacturer In India | Stainless Steel 304 Outlet Manufacturer In Mumbai Manufacturer In Mumbai | Stainless Steel 304 Outlet Exporter In India | Stainless Steel 304 Outlet Exporter In Mumbai | Stainless Steel 304 Outlet Supplier In India | Stainless Steel 304 Outlet Supplier In Mumbai | Stainless Steel 304 Outlet Stockist In India | Stainless Steel 304 Outlet Stockist In Mumbai


Stainless Steel 304 Outlet
      Stainless Steel 304 Outlet

This is combined with better creep properties at temperature and Stainless Steel 304 Sweepolet Fittings is very tough and ductile. Stainless Steel 304 Nipple Outlet Fittings has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing sulphur gases are not present. With its high chromium content, Stainless Steel 304 Latrolet Fittings offers good corrosion resistance to increase high temperature properties.

The high chromium and nickel contents of Stainless Steel 304 Insertweldolet Fittings provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys. Stainless Steel 304 Coupolet Fittings is the low carbon version of the alloy, which is utilized for ease of fabrication.

Stainless Steel 304 Outlet
Specifications : ASTM A182 & ASME SA182
Size : 1/8″-4″ (DN6-DN100)
: ASME / ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799 etc
Connect Type : Welded, threaded, BW, SW
SS 304 Outlet Chemical Composition


Grade C Mn Si P S Cr Mo Ni N
304 min. 18.0 8.0
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10
Stainless Steel 304 Olet Mechanical Properties


Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201
Equivalent Grades for 304 Stainless Steel Outlets


Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304
Stainless Steel 304 Outlet /Olet Application Industries


  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
SS 304 Outlet Test Certificates


We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing


We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test



• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *