Nickel Alloy 200 Tubes Manufacturer

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tubes, which is commercially pure (99.6 %) wrought nickel. Nickel 200 Seamless Tubes (UNS N02200) is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Nickel 200 Welded Tubes can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel 200 ERW Tubes. Hot working temperatures of Nickel 200 ERW Tubes should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F.

Nickel Alloy 200 Tubes Manufacturer In India | Nickel Alloy 200 Tubes Manufacturer In Mumbai | Nickel Alloy 200 Tubes Exporter In India | Nickel Alloy 200 Tubes Exporter In Mumbai | Nickel Alloy 200 Tubes Supplier In India | Nickel Alloy 200 Tubes Supplier In Mumbai | Nickel Alloy 200 Tubes Stockist In India | Nickel Alloy 200 Tubes Stockist In Mumbai
Nickel Alloy 200 Tubes
        Nickel Alloy 200 Tubes

Annealing in Nickel 200 Round Tubes should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature in Nickel 200 Square Tubes for this can greatly influence the mechanical properties and structure of the material. When operating temperatures are expected to exceed 600 Degree F, carbon content in Nickel 200 Rectangular Tubes becomes critical.

The lower carbon content of Nickel 200 Electropolish Tubes makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel 200 Instrumentation Tubes are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel 200 High Pressure Tubes has good mechanical properties and excellent resistance to many corrosive environments.

Nickel Alloy 200  Tubes Specifications

Specifications : ASTM B161, B622 / ASME SB163, B730
Dimensions : ASTM, ASME and API
Alloy 200 Tubes Size
: 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk.
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / ERW / Welded / Fabricated / LSAW Tubes
Form : Round, Square, Rectangular, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded

200 Nickel Alloy Tube Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 200 Tubing Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Seamless and Welded Tubes

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Seamless /  Welded Tubes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel Alloy 200 Tube Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Tubes

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tubes, which is commercially pure (99.6 %) wrought nickel. Nickel 200 Seamless Tubes (UNS N02200) is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Nickel 200 Welded Tubes can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel 200 ERW Tubes. Hot working temperatures of Nickel 200 ERW Tubes should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top