Inconel Alloy 718 Nuts Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 718 Nuts And Bolts, which should be given uniform reductions to avoid the formation of duplex grain structures. For most applications, these Inconel 718 Hex Head Bolts is specified as: solution annealed and precipitation hardened (precipitation hardening, age hardening, and precipitation heat treatment are synonymous terms). Inconel 718 Hex Head Nuts is typically used for: Jet engine and Gas turbine operations. These Inconel 718 Square Bolts is non – magnetic, which is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.

Inconel Alloy 718 Nuts Manufacturer In India | Inconel Alloy 718 Nuts Manufacturer In Mumbai | Inconel Alloy 718 Nuts Exporter In India | Inconel Alloy 718 Nuts Exporter In India | Inconel Alloy 718 Nuts Exporter In Mumbai | Inconel Alloy 718 Nuts Supplier In India | Inconel Alloy 718 Nuts Supplier In Mumbai | Inconel Alloy 718 Nuts Stockist In India | Inconel Alloy 718 Nuts Stockist In Mumbai 
Inconel Alloy 718 Nuts
      Inconel Alloy 718 Nuts

Inconel 718 Square Bolts is age harden able and often used in high temperature dynamic applications. These Inconel 718 U-Bolts has excellent creep – rupture strength at temperatures to 1300 Degree F. This treatment gives the highest room temperature tensile and yield strengths in Inconel 718 Lock Nuts as well as producing the highest fatigue strength. These Inconel 718 Eye Bolts can be easily post – hardened by precipitation – hardening heat treatments.

Inconel 718 Eye Nuts is a high strength, corrosion resistant nickel chromium alloy, initially developed for the aerospace industry and still considered the material of choice for the majority of aircraft engine components. These Inconel 718 T-Bolts is a precipitation harden able nickel – based alloy designed to display exceptionally high yield, tensile and creep – rupture properties at temperatures up to 704 Degree C.

Alloy 718 Bolt/Nut Specifications

Specifications : ASTM B 637 ASME SB 637
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

718 Inconel Alloy Bolt/Nut Chemical Composition

Grade C Mn Si Fe S Cr Al Ni
718 min. bal 17.0 0.2 50.0
max. 0.08 0.35 0.35 bal 0.01 21.0 0.8 55.0

Inconel Alloy 718 Bolt/Nut Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 718 Inconel Bolt/Nut

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 718 N07718 2.4668

Alloy 718 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

718 Inconel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Inconel Alloy 718 Nuts

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 718 Nuts And Bolts, which should be given uniform reductions to avoid the formation of duplex grain structures. For most applications, these Inconel 718 Hex Head Bolts is specified as: solution annealed and precipitation hardened (precipitation hardening, age hardening, and precipitation heat treatment are synonymous terms). Inconel 718 Hex Head Nuts is typically used for: Jet engine and Gas turbine operations. These Inconel 718 Square Bolts is non – magnetic, which is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *