Carbon Steel En Series Round Bar Manufacture

Carbon Steel En Series Round Bar

 

Sachiya Steel International is a recognized trader, manufacturer and dealer of Carbon Steel En Series Round Bar, which is the low carbon version of the alloy. EN Series Carbon Steel Square Bars has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing sulphur gases are not present. With its high chromium content, EN Series Carbon Steel Flat Bars offers good corrosion resistance to increase high temperature properties.

The high chromium and nickel contents in EN Series Carbon Steel Threaded Bars provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys. EN Series Carbon Steel Hollow Bars is utilized for ease of fabrication. In most instances the grain size and carbon content of the plate can meet excellent and remarkable requirements of clients. EN Series Carbon Steel Hexagonal Bars is often used at cryogenic temperatures, with excellent toughness to -450 Degree F, and low magnetic permeability.

Carbon Steel En Series Round Bar | Carbon Steel En Series Round Bar | Carbon Steel En Series Round Bar| Carbon Steel En Series Round Bar | Carbon Steel En Series Round Bar 

EN Series Carbon Steel Triangular Bars is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. EN Series Carbon Steel Bars does not readily corrode, rust or stain with water as ordinary steel does. However, EN Series Carbon Steel Rods is not fully stain-proof in low – oxygen, high – salinity, or poor air – circulation environments.

 

Carbon Steel EN Series Round Bar Specifications

Specifications : ASTM A105, ASME SA105
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Carbon Steel EN Series Round Bars
:  3.0 – 50.8 mm, Over 50.8 – 300mm
Carbon Steel EN Series Rectangular Bars
: 6.35 x 12.7mm,6.35 x 25.4mm,12.7 x 25.4mm
Carbon Steel EN Series Hex Bars : AF5.8mm–17mm
Carbon Steel EN Series Square Bars
: AF2mm – 14mm, AF6.35mm,9.5mm,12.7mm, 15.98mm,19.0mm, 25.4mm
Carbon Steel EN Series Flat Bars
: 1/2” to 10” in thickness range of 2mm to 150mm,
Finish : Bright, Polish & Black
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

 

En Series Carbon Steel Round Bars Chemical Composition

Grade
C% Si% Mn% Cr% Mo% W%
EN-1A 0.007 TO 0.15 0.10 0.80 TO 1.00 S P
0.20 TO 0.30 0.70 MAX
EN-8 0.35 TO 0.45 0.05 TO 0.30 0.60 TO 1.00 S P
0.06 MAX 0.06 MAX
EN-9 0.50 TO 0.60 0.05 TO 0.30 0.5 TO 0.80
EN-19(V 320) 0.35 TO 0.45 0.10 TO 0.30 0.5 TO 0.80 0.90 TO 1.40 0.20 TO 0.40
EN-24(V 130) 0.35 TO 0.45 0.10 TO 0.35 0.45 TO 0.70 0.90 TO 1.40 0.20 TO 0.35 NI
1.3 TO 1.8
EN-31 R-100 0.90 TO 1.20 0.10 TO 0.35 0.30 TO 0.75 1.00 TO 1.60
EN-36C E-200 0.12 TO 0.18 0.10 TO 0.35 0.30 TO 0.60 0.60 TO 1.10 NI
3.0 TO 3.75
EN-42 0.70 TO 0.85 0.10 TO 0.40 0.55 TO 0.75
EN-44 0.90 TO 1.20 0.30 0.45 TO 0.70
EN-45 F-110 50 TO 0.60 1.5 TO 2.0 0.70 TO 1.00
EN-351 0.10 TO 0.20 0.35 0.60 TO 1.00 0.40 to 0.80 0.08 to 0.10 NI
0.60 TO 1.00
EN-353 0.10 TO 0.20 0.35 0.50 TO 1.00 0.75 TO 1.25 0.08 to o.15 NI
1.00 TO 1.50

Carbon Steel En Series Bar HEAT TREATMENT

Grade HEAT TREATMENT CORRESPONDING SPECIFICATION
Hardening Temperature Quenching Medium Tempering Temperature Brinell Rock well hardness JAPAN JIS AISI POLDI THREAD
EN-1A
EN-8 750-900 OIL 150-200
EN-9 850-900 OIL 200-250 55-60
EN-19 (V 320) 900-950 OIL 200-225 45-55 SCM 4 4140
EN-24 (V 130) 830-860 OIL 540-680 45-55 SNCM 8 4340
EN-31 R-100 820-860 OIL 180-225 59-65
EN-36C
E-200
780-860 OIL 170-210 61-63 SNC 22 3415
EN-42 600-700 DIRECT HARDENING 40-45
EN-44 650-750 OIL 150 45-50
EN-45 830-860 OIL 470-520 50-55 9255
EN-351 850-860 OIL 175-200 62-64
EN-353 840-870 OIL 150-200 62-64

 

EN Series Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

EN Series Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

 

Carbon Steel En Series Round Bar

Sachiya Steel International is a recognized trader, manufacturer and dealer of Carbon Steel En Series Round Bar, which is the low carbon version of the alloy.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top