Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel T1 Tubes, which is preferable, but not necessary, that the alloy be in the solution – annealed condition when welded. Annealing at temperatures lower than the solution heat – treating may cause precipitation of secondary phases, which may affect the strength and ductility of these Alloy Steel T1 Seamless Tubes. The web should be thinned down to about one – third the web – thickness of a standard drill and thus better finishes of Alloy Steel T1 Welded Tubes can be obtained by increasing the speed and decreasing the feed.
Alloy Steel T1 Tubes Manufacturer In India | Alloy Steel T1 Tubes Manufacturer In Mumbai | Alloy Steel T1 Tubes Exporter In India | Alloy Steel T1 Tubes Exporter In Mumbai | Alloy Steel T1 Tubes Supplier In India | Alloy Steel T1 Tubes Supplier In Mumbai | Alloy Steel T1 Tubes Stockist In India | Alloy Steel T1 Tubes Stockist In Mumbai
Automatic screw machines are not recommended for these Alloy Steel T1 EFW Tubes because speeds are generally excessive and carbide – tipped tools will not hold up. Sulphur – base cutting fluid should be used for machining Alloy Steel T1 ERW Tubes, where all traces of cutting fluid should be removed prior to heat-treatment or high temperature service. These Alloy Steel T1 Round Tubes are indicative only of the results obtained in such tests and should not be considered as guaranteed maximums or minimums.
Alloy Steel T1 Square Tubes must be tested under actual service conditions to determine their suitability for a particular purpose. Furnace trays in these Alloy Steel T1 Rectangular Tubes, which used to support heavy loads, have been exposed to temperatures up to 2300 Degree F in an oxidizing atmosphere without bending or warping.
Alloy Steel T1 Seamless Tubes Specifications |
||
Specifications | : | ASTM A/ASME SA213, A691 |
Dimensions | : | ASTM, ASME and API |
Tubes Size |
: | 1 / 2” OD up to 5” OD, customs diameters also available |
Outer Diameter | : | 6-2500mm; WT:1-200mm |
Schedule | : | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Type | : | Seamless / EFW / Fabricated |
Form | : | Round, Square, Rectangular, Hydraulic Etc |
Length | : | Single Random, Double Random & Cut Length. |
End | : | Plain End, Beveled End, Treaded |
T1 Alloy Steel Tube Chemical Composition
Grade
|
C≤
|
Mn
|
P≤
|
S≤
|
Si≤
|
Mo
|
---|---|---|---|---|---|---|
T1
|
0.10~0.20
|
0.30~0.80
|
0.025
|
0.025
|
0.10~0.50
|
0.44~0.65
|
Alloy Steel T1 Tubes Mechanical Properties
Grade | Tensile Strength, MPa | Yield Strength, MPa | Elongation, % | Hardness, HB |
T1 | 415 min | 205 min | 30 min | 163 max |
Alloy Steel T1 Seamless Tube Outside Diameter and Tolerance
Outside Diameter | OD Tolerance | WT Tolerance | Ovality Tolerance | Cut Length Tolerance |
OD≤ 12, 7 mm | ± 0, 13 mm | ± 15 % | – | + 3, 18 mm, – 0 mm |
12, 7 mm < OD ≤ 38, 1 mm | ± 0, 13 mm | ± 10 % | max, 1, 65 mm | + 3, 18 mm, – 0 mm |
38, 1 mm < OD ≤ 88, 9 mm | ± 0, 25 mm | ± 10 % | max, 2, 41 mm | + 4, 76 mm, – 0 mm |
Alloy Steel T1 Seamless Tubes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
T1 Alloy Steel A213 Tube Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Alloy Steel T1 Tubes
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel T1 Tubes, which is preferable, but not necessary, that the alloy be in the solution – annealed condition when welded. Annealing at temperatures lower than the solution heat – treating may cause precipitation of secondary phases, which may affect the strength and ductility of these Alloy Steel T1 Seamless Tubes. The web should be thinned down to about one – third the web – thickness of a standard drill and thus better finishes of Alloy Steel T1 Welded Tubes can be obtained by increasing the speed and decreasing the feed.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5