Sachiya Steel International is one of the known exporter and trader for Stainless Steel 329 Angle, which offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids. The addition of copper to Stainless Steel 329 Angle gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids.

The austenitic structure also gives Stainless Steel 329 C-Channel excellent toughness, even down to cryogenic temperatures. The high strength and corrosion resistance of our Stainless Steel 329 H-Beam make it a better choice than the conventional stainless steels and a cost effective alternative to more expensive nickel – base alloys where excellent formability, weldability, strength and corrosion resistance are essential.

Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle | Stainless Steel 329 Angle 

Because of its nitrogen content, Stainless Steel 329 I-Beam has greater tensile strength than common austenitic stainless, while retaining high ductility and impact strength. The ASME allowable stresses for our Stainless Steel 329 T-Beam are up to 75 % higher than for 316L stainless, and more than twice those for the copper – nickel alloys.

329 Stainless Steel Angle is a widely used high – temperature bearing structural member of austenitic heat resistant alloy of high strength. Our 329 Stainless Steel Chain is mainly due to the addition of carbon, aluminum, titanium, and annealed at a minimum temperature of 1149 Degree C in order to achieve the grain size or more grades of crude.

 

SS 329 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 329 Angle
: 5mm to 9mm
SS 329 Channel
: 40mm*20mm~300mm*300mm
SS 329 Beam : 3″ thru 12.31″
SS 329 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

 

329 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 329 0.08 max 1 max 0.75 max 0.040 max 0.030 max 23 – 28 1.0-2.0 2.5-5.0

Stainless Steel 329 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.285 lb/in3 MPA-725 MPA-550 25 %

Equivalent Grades for 329 Stainless Steel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 329 1.4460 S32900 SUS 329 329S31

 

SS 329 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

329 Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

 

Stainless Steel 329 Angle

Sachiya Steel International is one of the known exporter and trader for Stainless Steel 329 Angle, which offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5