Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 317 Round Bar , which are different types of stainless steels. when nickel is added, for instance, the austenite structure of iron is stabilized. This crystal structure of Stainless Steel 317 Square Bars makes such steels virtually non- magnetic and less brittle at low temperatures. Stainless Steel 317 Flat Bars have an austenitic crystalline structure, which is a face – centered cubic crystal structure. Austenite Stainless Steel 317 Threaded Bars make up over 70 % of total stainless steel production.

Stainless Steel 317 Hollow Bars contain a maximum of 0.15 % carbon, a minimum of 16 % chromium, and sufficient nickel and / or manganese to retain an austenitic structure at all temperatures from the cryogenic region to the melting point of the alloy. For greater hardness and strength, more carbon is added in Stainless Steel 317 Hexagonal Bars. With proper heat treatment, Stainless Steel 317 Triangular Bars are used for such products as razor blades, cutlery, and tools.

Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar  | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar | Stainless Steel 317 Round Bar

Significant quantities of manganese have been used in compositions of Stainless Steel 317 Bars. Manganese preserves an austenitic structure in Stainless Steel 317 Rods, similar to nickel, but at a lower cost. The most widely used austenite steel is the 317 Stainless Steel Round Bars, also known as 18 / 8 for its composition of 18 % chromium and 8 % nickel.

SS 317 Round Bar Specifications

Specifications : ASTM A276, ASME SA276 / ASTM A479  ASME SA479
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 317 Round Bars
: Outside Diameter in the range of 4mm to 500mm
SS 317 Bright Bars
: Outside Diameter in the range of 4mm to 100mm
SS 317 Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
SS 317 Square Bars
: 18mm – 47mm (11/16″ to 1-3/4″)
SS 317 Flat Bars
: 1/2” to 10” in thickness range of 2mm to 150mm,
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

317 Stainless Steel Round Bar Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.0 max 0.045 max 0.030 max 18 – 20 3.0-4.0 11.0-15.0 57.845 min

Stainless Steel 317 Rods Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Round Bar

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

SS 317 Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

317 Steel Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 317 Round Bar

Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 317 Round Bar, which are different types of stainless steels. when nickel is added, for instance, the austenite structure of iron is stabilized.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5