Stainless Steel 310H Threaded Forged Fittings

Stainless Steel 310H Threaded Forged Fittings Manufacture

Sachiya Steel International is one of the well-established Manufacture & Exporter of high quality Stainless Steel 310H Threaded Forged Fittings, which is silver – coloured metal that conducts heat and electricity well. Stainless Steel 310H Forged Threaded Elbow is too reactive to exist alone so it only occurs naturally in the earth’s crust as iron ores, such as hematite, magnetite, and siderite. Identifying characteristics of Stainless Steel 310H Forged Threaded Tee is that it is strongly magnetic.

Stainless Steel 310H Forged Threaded Cross is exposed to a strong magnetic field, where any piece of steel can be magnetized. Stainless Steel 310H Forged Threaded Cap is most troublesome characteristic is its tendency to form rust. Rust (or ferric oxide) is a brown, crumbly compound that is produced when Stainless Steel 310H Forged Threaded is exposed to oxygen. The rate of rust – how quickly Stainless Steel 310H Forged Threaded Coupling turns into ferric oxide – is determined by the oxygen content of the water and the surface area of the steel.

Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings

Rust can be prevented by coating Stainless Steel 310H Forged Threaded Union with other metals that are chemically more attractive to oxygen, such as zinc (the process of coating iron with zinc is referred to as ‘galvanizing’). However, the most effective method of protecting against rust is the use of the Stainless Steel 310H Forged Threaded Bushing.

 

Stainless Steel 310H Forged Threaded Fittings Specifications

Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

SS 310H Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 310H 0.10 max 2 max 1.00 max 0.045 max 0.030 max 24 – 26 19 – 21 53.885 min

Stainless Steel 310H Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310H Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310H S31009

 

Stainless Steel 310H Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

SS 310H Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

 

Leave a Comment

Your email address will not be published.