Stainless Steel 304L Round Bar Manufacturer

Stainless Steel 304L Round Bar

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304L Round Bar, which is readily fabricated by standard commercial procedures. In comparison to carbon steel, Stainless steel 304L Square Bars are tougher and tend to work harden rapidly. Stainless steel 304L Flat Bars are a heat resisting stainless steel with high resistance to oxidation scaling and has high strength at elevated temperatures. Stainless steel 304L Threaded Bars can be welded using all of the common welding processesStainless steel 304L Hollow Bars are combined with better creep properties at temperature and are very tough and ductile.

Stainless steel 304L Hexagonal Bars has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing Sulphur gases are not present. Stainless steel 304L Triangular Bars is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000 Degree F. With its high chromium content, Stainless steel 304L Bars offer good corrosion resistance to increase high temperature properties.

Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar

Stainless steel 304L Rods’ high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys. SS 304L Round Bars is the low carbon version of the alloy and is utilized for ease of fabrication. 304L Stainless Steel Round Bars is a high carbon modification developed for enhanced creep resistance.

SS 304L Round Bar Specifications

Specifications : ASTM A276, ASME SA276 / ASTM A479  ASME SA479
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 304L Round Bars
: Outside Diameter in the range of 4mm to 500mm
SS 304L Bright Bars
: Outside Diameter in the range of 4mm to 100mm
SS 304L Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
SS 304L Square Bars
: 18mm – 47mm (11/16″ to 1-3/4″)
SS 304L Flat Bars
: 1/2” to 10” in thickness range of 2mm to 150mm,
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

304L Stainless Steel Round Bar Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.035 max 2 max 1.0 max 0.045 max 0.030 max 18 – 20 8 – 13

Stainless Steel 304L Rods Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304L Stainless Steel Round Bar

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304L 1.4306/1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11

SS 304L Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

304L Steel Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 304L Round Bar

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304L Round Bar, which is readily fabricated by standard commercial procedures.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top