Sachiya Steel International is one of the Leading Manufacturer And Exporter of High quality Nickel Alloy 200 Wire, where chlorine additives would be an alternative. Nickel 200 Coil Wire is a Nickel based alloy containing 47.5 % Nickel, 22 % Chromium and 18.5 % Iron, with small amounts of Cobalt, Molybdenum and Tungsten. All hot – or cold – worked parts of Nickel 200 Wire should be annealed and rapidly cooled in order to restore the best balance of properties. Carbide tools in Nickel 200 Wire should have smaller angles than high – speed tools and operating speeds can be higher.

After 100 hours in petroleum coke, Nickel 200 is completely penetrated by carburization; whereas its specimens showed no carburization at all. Useful Properties for Aircraft and Furnace Parts, Nickel 200 Wire is recommended especially for use in furnace applications. Alloy 200 Wire has unusual resistance to oxidizing, reducing, and neutral atmospheres, where work hardening occurs whenever a tool makes a cut. Its uncommon resistance to oxidation, combined with exceptional heat resistance and fabricability, make Alloy 200 a widely sought – after blend in a number of industries.

Nickel Alloy 200 Wire

        Nickel Alloy 200 Wire

Thoroughly clean work piece after machining Alloy 200 Coil Wire, is to prevent surface contamination during subsequent heat treating. Because of the low thermal conductivity in Alloy 200 Wire, heat build – up is a problem, and therefore, correct coolant application is necessary.

Nickel Alloy 200 Wire | Nickel Alloy 200 Wire | Nickel Alloy 200 Wire | Nickel Alloy 200 Wire | Nickel Alloy 200 Wire | Nickel Alloy 200 Wire

Nickel 200 Wire Specifications

Specifications : ASTM B160 ASME SB160
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire, Electrode Wire, Welding Wire.

200 Nickel Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Nickel 200 0.15 max 0.35 max 0.35 max 0.25 max 0.01 max 0.40 max 99.0 min

Nickel 200 Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200  8.9 g/cm3  1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

200 Nickel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Wire

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High quality Nickel Alloy 200 Wire, where chlorine additives would be an alternative.

Product In-Stock: InStock

Editor's Rating:
5