Monel Alloy 400 Wire Mesh Manufacturer

Monel Alloy 400 Wire Mesh

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High quality Monel Alloy 400 Wire Mesh, where maximum attainable surface hardness depends primarily on carbon content. However, content alloying elements of Monel 400 Hexagonal Wire Mesh influence the overall characteristics, where these alloying elements primarily influence hardenability. Maximum hardness and strength in small sections of Monel 400 Welding Wire Mesh increase as carbon content increases, up to about 0.7 %. Contents in Monel 400 Netting Wire Mesh greater than 0.3 % can increase the possibility of cracking during quenching or welding. Monel 400 Woven Wire Mesh also influences other mechanical and fabrication properties including toughness and machinability.

Monel 400 Spring Steel Wire Mesh is often specified when high strength is needed in moderate – to – large sections. Whether tensile or yield strength is the basis of design, thermally treated Monel 400 Fencing Wire Mesh generally offer high strength – to – weight ratios. For applications requiring maximum ductility, Alloy 400 Hexagonal Wire Mesh with low Sulphur levels can be supplied by producers using ladle – refining techniques. The low carbon in Alloy 400 Welding Wire Mesh provides resistance to sensitization during welding and other thermal processes.

Monel Alloy 400 Wire Mesh | Monel Alloy 400 Wire Mesh | Monel Alloy 400 Wire Mesh | Monel Alloy 400 Wire Mesh | Monel Alloy 400 Wire Mesh

Alloy 400 Netting Wire Mesh does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. In general, wear resistance can be improved by increasing the hardness of Alloy 400 Woven Wire Mesh, by specifying an alloy with greater carbon content (without increasing hardness), or by both.

Monel 400 Wire mesh Specifications

Specifications : ASTM / ASME B164 / SB164
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Monel 400 Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Monel 400 0.30 max 2.00 max 0.50 max 0.24max 28.0-34.0 2.50 max 63.00 min

Alloy 400 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Alloy 400 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

400 Monel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Monel Alloy 400 Wire Mesh

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High quality Monel Alloy 400 Wire Mesh, where maximum attainable surface hardness depends primarily on carbon content.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top