Inconel 601 Channel Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 601 Channel And Other Inconel Products, which resists oxidation and spalling at temperatures as high as 1260 Degree C. Our Inconel 601 Angle is a nickel – chromium alloy that is highly resistant to oxidation in the course of 2200 Degree F. This Inconel 601 C-Channel is used for chemical and process industries in catalyst grid supports in equipment for nitric acid production, Condenser tubes in sour – water, Insulating cans in ammonia reformers, Combustor components, Strippers, Process heaters and so on.

Inconel 601 Channel
Inconel 601 Channel

Our Inconel 601 H-Beam is widely used in aerospace, thermal processing, power production, chemical treatment and land base gas turbine engines. The welding method and filler metals used in this Inconel 601 I-Beam will be dependent upon the service conditions to which the final fabricated part will be subjected. Our Inconel 601 T-Beam is also used for jet – engine igniters and for combustion – can liners, diffuser assembles, and containment rings in gas turbines for aircraft, vehicular and industrial applications.

Inconel 601 Channel | Inconel 601 Channel | Inconel 601 Channel | Inconel 601 Channel | Inconel 601 Channel | Inconel 601 Channel | Inconel 601 Channel

This Inconel 601 Chain has outstanding thermal and electrical properties as well as its ease of use. Our Alloy 601 Angle as well has outstanding oxidation resistance to 2200 Degree F, and is forged at 1038 Degree C to 1233 Degree C (1900 Degree F to 2250 Degree F). These Nickel – chromium – iron Alloy 601 C-Channel is a general purpose engineering material for applications that require resistance to heat and corrosion.

Inconel 601 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B166 / ASME B166
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Inconel 601 Angle
: 5mm to 9mm
Inconel 601 Channel
: 40mm*20mm~300mm*300mm
Inconel 601 Beam : 3″ thru 12.31″
Inconel 601 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

601 Inconel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si Cr S Fe Mo Ni Cu
Inconel 601 0.10 max 1 max 0.50 max 21.0–25.0 0.15 max balance 58.0-63.0 0.50 max

Inconel 601 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.41 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30%

Equivalent Grades for 601 Inconel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Inconel 601 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

601 Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 601 Channel

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 601 Channel And Other Inconel Products, which resists oxidation and spalling at temperatures as high as 1260 Degree C.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top