Sachiya Steel International offers a widespread collection of Inconel 600 Round Bar, which is a standard engineering material used for various purposes in the heat – treating industry. Inconel 600 Square Bars shows high levels of resistance to stress – corrosion cracking, exhaust gases, corrosion by high purity water, atmospheric corrosion, halogen, and most organic acids and inorganic acids.

These Inconel 600 Flat Bars can also be hardened and strengthened through cold work. Inconel 600 Threaded Bars has lower rate of attack from chlorine or hydrogen chloride. A minimum treatment of 1650 Degree F for one hour is suggested in these Inconel 600 Hollow Bars, but 1800 Degree F – 1850 Degree F for one hour preferred. Inconel 600 Hexagonal Bars exhibits cold forming characteristics normally associated with chromium – nickel stainless steels.

These Inconel 600 Triangular Bars is not an age hardening alloy, where cold working is the only available means of hardening. Welding Inconel 600 Bars can be achieved via shielded metal – arc welding using AWS ENiCrFe-3 electrode. These Inconel 600 Rods is used extensively in the chemical industry for its strength and corrosion resistance.

               Inconel 600 Round Bar | Inconel 600 Round Bar | Inconel 600 Round Bar

Alloy 600 Square Bars also provides excellent resistance to alkaline solutions and has very good corrosion resistance. These Alloy 600 Flat Bars is a nickel – chromium – iron alloy with good oxidation resistance at high temperatures and resistance to chloride – ion stress corrosion cracking corrosion by high – purity water, and caustic corrosion.

 

Inconel 600 Round Bar Specifications

Specifications : ASTM B166 / ASTM SB166
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

 

600 Inconel Round Bar Chemical Composition

Grade C Mn Si Cu S Fe Mo Ni Cr
Inconel 600 0.15 max 1 max 0.50 max 0.50 max 0.15 min 6.0-10.0 72 min 14.0–17.0

Inconel Alloy 600 Rods Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.47 g/cm3 1413 °C (2580 °F)  Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

 

Equivalent Grades for 600 Inconel Round Bar

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600  NA 13  МНЖМц 28-2,5-1,5 NC15FE11M  NiCr15Fe

 

Inconel 600 Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

600 Inconel Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Inconel 600 Round Bar

Sachiya Steel International offers a widespread collection of Inconel 600 Round Bar, which is a standard engineering material used for various purposes in the heat – treating industry.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5