Alloy Steel P5 Pipes Manufacture

Alloy Steel P5 Pipes

Sachiya Steel International is a known Manufacture & dealer of Alloy Steel P5 Pipes, which is available at market leading prices. At the same time, by control of carbon and nitrogen, and careful selection of chromium, molybdenum, and tungsten levels, many of the nickel – based alloy corrosion properties, such as of Alloy Steel P5 Seamless Pipes, have been attained.

The operating conditions of flue gas desulfurization systems in Alloy Steel P5 Welded Pipes offer a challenging environment for corrosion resistant materials. The hot-working temperature range for Alloy Steel P5 EFW Pipes is 1600 Degree F – 2250 Degree F (870 Degree C – 1230 Degree C). Alloy Steel P5 ERW Pipes should be water quenched after hot working, where heat treatment is recommended after hot working to ensure maximum corrosion resistance.

 

Alloy Steel P5 Seamless Pipes Specifications

Specifications : ASTM A 335 ASME SA 335
Dimensions : ASTM, ASME and API
Size : 1/8″NB TO 30″NB IN
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length : Within 13500mm
Type : Seamless / Fabricated
Form : Round, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded

 

Alloy Steel P5 Pipes Chemical Composition

Alloy Steel P5 C Cr Mn Mo P S Si
0.05 – 0.15 4.00 – 6.00 0.30 – 0.60 0.45 – 0.65 0.025 max 0.025 max 0.50 – 1.00

 

Alloy Steel P5 Pipe Mechanical Properties

Tensile Strength, MPa Yield Strength, MPa Elongation
415 min 205 min 30 min

 

Outside Diameter & Tolerance

ASTM A450 Hot rolled Outside Diameter, mm Tolerance, mm
OD≤101.6 +0.4/-0.8
101.6<OD≤190.5 +0.4/-1.2
190.5<OD≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
OD<25.4 ±0.10
25.4≤OD≤38.1 ±0.15
38.1<OD<50.8 ±0.20
50.8≤OD<63.5 ±0.25
63.5≤OD<76.2 ±0.30
76.2≤OD≤101.6 ±0.38
101.6<OD≤190.5 +0.38/-0.64
190.5<OD≤228.6 +0.38/-1.14
ASTM A530 & ASTM A335 NPS Outside Diameter, inch Tolerance, mm
1/8≤OD≤1-1/2 ±0.40
1-1/2<OD≤4 ±0.79
4<OD≤8 +1.59/-0.79
8<OD≤12 +2.38/-0.79
OD>12 ±1%

 

Alloy Steel P5 Pipes Packaging

Alloy Steel P5 Pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Alloy Steel P5 Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

 

 

 

Alloy Steel P5 Pipes

Sachiya Steel International is a known Manufacture & dealer of Alloy Steel P5 Pipes, which is available at market leading prices.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top